Waves Parametric Convolution Reverb IR-360 Manuale Utente Scaricare il pdf (Pagina 6)

Reverb Filters

These are Hi and Low 6dB per Octave Shelves which affect the overall reverb

sound. In this case, they are similar to normal EQ filters with the exception that

they affect only the reverb, or the wet signal. These two shelves do not affect the

direct signal.

OW SHELF FREQ:16 – 1600Hz. Default: 160Hz.

Sets the cutoff frequency, which will be in the middle of the curve of this 6dB per

octave filter.

OW SHELF GAIN: +12 to –24dB. Default: 0dB.

Sets the gain of the Low Shelf filter.

I SHELF FREQ:1000 – 21000Hz. Default :2625Hz.

Sets the cutoff frequency, which will be in the middle of the curve of this 6dB per

octave filter.

I SHELF GAIN: +12 to –24dB. Default: –8dB.

Sets the gain of the Hi Shelf filter. At –24dB, this filter increases order

(steepness) and becomes more like a Low Pass filter, so don’t be surprised if you

hear a drop between –23.9 and –24; it just drops.

Reverb Properties

PREDELAY: 0 – 131.9ms. Default: 0.

The Predelay control sets the time in milliseconds that will pass between the

direct sound and the arrival of the reverb tail.

EAR OFS: 0 – 30ms. Default:0.

This control sets an offset between the predelay to the front channels and rear

channels so that the rear channels can have a slightly longer predelay. If you

have first applied all available predelay in the overall predelay control, then the

offset control will decrease the overall predelay by the amount of offset you

specify.

Waves R360 software guide page 6 of 8

1 2 3 4 5 6 7 8

Nessun commento

Waves Parametric Convolution Reverb IR-360 Manuale Utente Pagina 6